Первый Сибирский форум по ремонту телерадиоаппаратуры

Вопросы по ремонту аппаратуры => Поиск прошивок SPI EEPROM NAND EMMC и обновлений для USB => Тема начата: papele от 28 Марта 2020, 23:17:03

Название: telefunken TE22182B30FC10
Отправлено: papele от 28 Марта 2020, 23:17:03

Good evening I have this TV that flashes the power on continuously. The voltages on the PSU are normal. I suspect bootloader. Is there firmware from USB? Which flash contains the bootloader. Thank you. :br: :br:i am looking for file to insert in usb   17MB8X Core Software Update.

Название: Re: telefunken TE22182B30FC10
Отправлено: seregatv от 30 Марта 2020, 16:41:39

На официальном сайте смотрели?

Название: Re: telefunken TE22182B30FC10
Отправлено: lotas от 30 Марта 2020, 16:59:41

SW update via USB
17MB8X Core Software Update
1. Please copy the file to USB device. There is no need to use any specific folder.
• upgrade_loader.pkg
2. Turn power to OFF by mechanical switch or removing AC plug and plug the USB to TV.
3. Keep pressing and holding “OK” key from remote control and at the same time turn power to
ON by mechanical SW and hold OK pressed until the standby led blinks very rapidly.
4. SW update starts automatically when the led starts blinking.
5. SW update is completed after led blink is done.
* After core update, user/profile settings and panel files do not change.
* After Core update, bootloader/mboot version will be updated.
* SW version can be controlled from other settings or service menu.

Название: Re: telefunken TE22182B30FC10
Отправлено: papele от 31 Марта 2020, 00:54:22

thanks to your help I solved it. :ay:

Название: Re: telefunken TE22182B30FC10
Отправлено: lotas от 31 Марта 2020, 01:04:54

I'm glad that helped.