Proman NAND/NOR programmer

[lotas]

Новое обновление tl86 plus proman с новым интерфейсом:

[dabliogames]

Hello greetings from Brazil

Could someone help me with this problem?

S29GL256N recording with error

Thanks.

[artur008]

TSOP56 ?

[dabliogames]

TSOP56 ?

yes

[artur008]

S29GL...N

[dabliogames]

S29GL...N

is already updated.

firmware: 60a
software: 60a

 

[artur008]

change the firmware to "HS_059_beta8_S29GLxxN.enc"
use the program "NAND Programmer.exe" from my archive

[dabliogames]

change the firmware to "HS_059_beta8_S29GLxxN.enc"
use the program "NAND Programmer.exe" from my archive

changed but did not work 

[dabliogames]

change the firmware to "HS_059_beta8_S29GLxxN.enc"
use the program "NAND Programmer.exe" from my archive

S29GL256N is NOR, not NAND !

[artur008]

S29GL256N is NOR, not NAND !

Yes, "NOR_059_beta8.exe". 

[dabliogames]

S29GL256N is NOR, not NAND !

Yes, "NOR_059_beta8.exe". 

Don't work 

 

[artur008]

What "does not work"? The firmware in the programmer changed?
1. Disconnect all USB, except the programmer. Turn off the anti-virus just in case.
2. Close the tweezers of the contacts.
3. Connect the USV native cable, Yellow blinked 4 times and lit.
4. Launch "Firmware Upgrade.exe" from the admin.
5. Chose the file "HS_059_beta8_S29GLxxN.enc".
6. Press the large button. All 100 percent.
Upgrade successfully!

[dabliogames]

What "does not work"? The firmware in the programmer changed?
1. Disconnect all USB, except the programmer. Turn off the anti-virus just in case.
2. Close the tweezers of the contacts.
3. Connect the USV native cable, Yellow blinked 4 times and lit.
4. Launch "Firmware Upgrade.exe" from the admin.
5. Chose the file "HS_059_beta8_S29GLxxN.enc".
6. Press the large button. All 100 percent.
Upgrade successfully!

I did all this friend, update occurs without problem, the recording is that I receive the error, either does not record anything or record and error in the verification.

<Chip information>;   <<<------ OK
NOR ID: 0x1227e_0x2222ffff
Manufacturer: Spansion
Part number: *S29GL256N, S29GL256P
 *Total memory size: 32 Mbytes
 *Range 0x0 - 0x1ffffff
 *Chip erase: supported
 *Maximum erase time: 512 second(s)
 *Type: 29 series
 *Sec Sector: yes

<Erase chip>:    <<<------ OK
NOR ID: 0x1227e_0x2222ffff
Manufacturer: Spansion
Part number: *S29GL256N, S29GL256P
 *Total memory size: 32 Mbytes
 *Range 0x0 - 0x1ffffff
 *Chip erase: supported
 *Maximum erase time: 512 second(s)
 *Type: 29 series
 *Sec Sector: yes
Chip erase finishes successfully.

<Programming data>:   <<<------ OK
Programming to address 0x0.
NOR ID: 0x1227e_0x2222ffff
Manufacturer: Spansion
Part number: *S29GL256N, S29GL256P
 *Total memory size: 32 Mbytes
 *Range 0x0 - 0x1ffffff
 *Chip erase: supported
 *Maximum erase time: 512 second(s)
 *Type: 29 series
 *Sec Sector: yes
Programming finished successfully. Total 33554432(0x2000000) bytes.

<Verify>:    <<<------ FAIL
NOR ID: 0x1227e_0x2222ffff
Manufacturer: Spansion
Part number: *S29GL256N, S29GL256P
 *Total memory size: 32 Mbytes
 *Range 0x0 - 0x1ffffff
 *Chip erase: supported
 *Maximum erase time: 512 second(s)
 *Type: 29 series
 *Sec Sector: yes
Reading data from 0x0 to 0x1ffffff.

Verify failed. There are(is) 2055989 different byte(s).

[artur008]

7. "Lick" the legs of the chip.  

[dabliogames]

7. "Lick" the legs of the chip.  

unsuccessfully   

there are 2 types of tsop56 adapter, does anyone know the difference between them?

REV206-NOR56-EWV2
REV206-NOR56-PL

[artur008]

The adapter that was included.

[dabliogames]

Yes, this is the one I received with the programmer

but there is another model, the design of the PCB is different and I have no information about them.

model EW: https://www.hklrf.com/TSOP56-FLASH-REV206-NOR56-EW-TSOP56-Socket-Adapter_3860.html

model PL: https://www.hklrf.com/TSOP56-FLASH-REV206-NOR56-PL-TSOP56-Socket-Adapter-For-ProMan-TL86-PLUS-Programmer_5267.html

[lotas]

NOR56-EW

[artur008]

Check the circuit from each chip contact to the programmer.

[yev_bo]

Артур, есть опыт уже с V60? вчера пробовал записать чип для UE40D5700, телек не захотел работать, перепрошил програматор на 59ю версию, телек сразу заработал.