16TV013R0
Chassis:
GN2SK QF
Models:
KD-55XD9305; KD-65XD9305
Subject: TV Set/Panel Handling Precautions (XD93)
PROBLEM:
If the TV set or panel is handled roughly, this can cause warping, scratches or other damage. The TV set handling precautions
are similar to the panel handling precautions basically.
INSTALLATION/SETUP (END USERS):
Keep the protective cover until the TV set is installed.
Hold the TV set in a vertical position (Do not lay TV set down or hold it with the screen facing up or down.)
One-man handling is prohibited
WORKING ON TABLE:
Put a soft and clean sheet on the table when you put the TV set or panel.
Be careful there is nothing on the table such as dust, scrap, screw, etc., to avoid scratching the aluminium frame or the
screen surface
Use “rubber gloves” when handling the panel
2/4
Sony Europe Limited
Service, Quality and Environment
Service Engineering
We recommend a spacer cushion. Refer to the drawing below for the size of the spacer cushion (15~50mm from aluminium frame.)
To prevent scratch damage, do not let the Edge Coat area touch the table surface.
