Здравствуйте просьба помочь приобрел программатор rt809h для прошивки Tv (leeco x4 55), очистил emmc, хочу восстановить mboot в консоль выдает только:
UART_115200
AC_ON
MIU0_DQS-OK
MIU1_DQS-OK
MIU2_DQS-OK
BIST0-OK
BIST1-OK
BIST2-OK
При подключении через vga ips определяет, как MST_EXT_SPI #ISP производитель MSTART:
092: MST main chip ID: 0x0000ЎЈ
093: -->Frequency auto adjust, rescanning ISP BUS...
094: Using Mode-A to scan VGA port...
095: Mode-A cannot identified the circuit board, change line sequence to Mode-D and continue to identifying...
096: MST main chip ID: 0x0000ЎЈ
097: MST main chip ID: 0x0000ЎЈ
098: -->Frequency auto adjust, rescanning ISP BUS...
099: Mode-D cannot identified the circuit board, change line sequence to Mode-B and continue to identifying...
100: MST main chip ID: 0x0000ЎЈ
101: MST main chip ID: 0x0000ЎЈ
102: Unable to detect memory chip part number, please power off circuit board, after that power it on and operate again.
103: Mode-B cannot identified the circuit board, change line sequence to Mode-C and continue to identifying...
104: Using Mode-A to scan VGA port...
105: MSTAR solution, part number starting with MSTЎўTSUMЎўSEЎўFEЈ¬their program is inside the external SPI flash memoryЎЈ
106:
http://www.ifix.net.cn/thread-14392-1-8.html107: The currently selected:MST_EXT_SPI #ISP, capacity: 128Mbits, 16Mbytes.
108: >------------------------------------OK---------------------------------------< При попытке считать или записать выдает ошибку не понимаю, что не так:
109: C:\MSTAR-BIN-TOOL-MASTER\MBOOT.BIN
110: File has been loaded, checksum: 16bits_0x3B6C Ј¬32bits_0xE6A73B6C :
111: VGA wire mode: SCL: VGA--15; SDA: VGA--12.
112: MST main chip ID: 0x0000ЎЈ
113: Scan SPI extension interface...
114: Initialization error
115:
116: MST main chip ID: 0x0000ЎЈ
117: Chip is not recognized, please check whether the circuit board is powered on and ISP cable is connected properly or not. If all ok, it maybe the chip is damage.
118: -->Frequency auto adjust, rescanning ISP BUS...
