EX-2L_Basil, EX-2L_Coriander, EX-2L_Eco_Basil, EX-2L_Ginger,
EX-2L_Paprika Chassis
BC
Subject IRIS
Software Packages Follow-Up for EX-2L Chassis [REVISION 19]
SYMPTOM
The latest software package #1741 is valid for the EX-2L_Basil, EX-2L_Coriander, EX-2L_Eco_Basil,
EX-2L_Ginger and EX-2L_Paprika Chassis. It has been released to solve the issues below.
Issue TB
Section
code
Rev.
Hum Noise Coming from Panel 09TV063 SFT R3
Digital TV Tuning Missing Channels 09TV078 SFT R7
IRIS code
DVB-T issue in Denmark
TV skips regional services in Denmark (TV2). TV2 is always stored in
channel space nr. 4, resulting in one of the following:
* 1. TV2 channel region at room no. 4 is not the same as before the change.
* 2. TV2 channel region stored several times, but the channel cannot be displayed.
1727 SFT R1
Multifeed services not available in digital
* For channels using multi-feed services (i.e. Premiere TV + Pay per view channels),
the TV set ignores scrambled services (though they can be selected by the customer)
and does not store in the tuned database.
C280 SFT R4
DVB-C missing mux (Numéricable network, France)
* Some digital services are missing after doing a quick scan in DVB-C.
1726 SFT R6
Country expansion spec change
* Implementation required for country expansion to support ComHem
(Sweden Cable), Ziggo (Netherlands Cable) and Cable Ready (Finland Cable).
C280 SFT R6
CEC SAT HDTV Box wakes TV up after STBY (DE)
* Condition: set connected to satellite receiver TDT4U HDTV by HDMI. If the
customer activates the wake-up function for specific hours using the menu options,
the TV passes from “Full STBY” to “Semi STBY”, and the set wakes up by itself.
6726 SFT R6
DVB-C VBI Teletext services not available (Nordic)
* Hearing impaired Teletext subtitles not displayed when any DVB subtitles
are present.
C286 SFT R6
Jerky picture motion on OTV service (DVB-T) C35B SFT R6
Character not properly shown in EPG/banner (Portugal)
* Some digital services are missing after doing a quick scan in DVB-C.
1731 SFT R6
Power Saving Mode reset to Off (DE) after presence sensor operation (DE) 117M SFT R6
DVB-C error 10
* Set goes to error mode (10 red blinks). Problem due to incorrect broadcaster
signalling.
C11D SFT R6
Incorrect Shop mode validation message in Spanish (Wrong Translation) / SFT R7
Æ
Condition
code
Symptom
code
Part
number
Ref.
Section
code
PCB
Defect
code
Repair
code
Qty.
Preventive x xxx 09TV040 xxx 1 2 1
Remedying x xxx 09TV040 xxx 1 3 1
