No image may appear (“Error 5”) due to no output of 12V/5V/3.3V/1.8V/1.2V. Simultaneously, the red LED will 5
times blink.
NOTE: After powering off and on again, the symptom may disappear.
CAUSE
Short-circuited or burnt chip capacitor(s) (10 μ / 16 V XR5, supplier: WALSIN).
SOLUTION
• When no picture appears, check the Main board for short-circuited or burnt chip capacitors, referring to the list
below (11 for 19L4000, only 8 for 26L4000 and 32L4000), and replace to (a) new one(s).
• At the same time, check whether “L31” is damaged (burnt). If this is the case, replace to a new one.
KDL-19L4000
WE 5300001~5300229
UK 5000001~5001557
OIRT 5600001~5600033
KDL-26L4000
WE 5300001~5312695
UK 5000001~5000081
OIRT 5700001~5701269
KDL-32L4000
WE 5300001~5306633
OIRT 5600001~5613405
